PCV help needed on ls swap
I put a 5.3 from 2004 trailblazer in 1963 corvette. I used a ls1 intake manifold on the 5.3 with the trailblazer throttle body. I have read every post I could find on pvc routing, none are exactly like mine; so here i am. Most post talk about using port on throttle body, I dont have one.
The ports I have are:
pass side on intake behind throttle body
front passenger side valve cover
rear driver side valve cover
driver side on intake behind throttle body
my thinking is:
rear driver side valve cover to -pvc valve- to port on intake pass side
front passenger side valve cover to (install barbed fitting on cold air intake tube)
plug driver side port on intake.
Does this sound OK? Thanks Tom
Read responses in ls1tech.com