Forumsee logo
Forumsee » Cars

Messages labeled as 'GMC'

<< Prev 1   ...   4 5 6 7 8 9 10 Next >>   25 50 75

5 days ago

I have a 56 Suburban and asking if anyone knows a source for the ribbed rubber floor mat for the rear. I would not expect to find oe type so reasonably accurate industrial migh...
I'm new to the site, but thought i would share my build as I progress. I'm certain all of the things I'm doing have been done before. So nothing new here. I bought this 1967 C...
Some of you guys may know, I've been on the board for a long time but over the past couple trucks, I have made some bed wood kits of my own. (Pics) I am a licensed Gener...
I'm replacing my dash with Dakota Digital and want to know what my old Tac Dash is worth. It has an added clock that's not original but looks like it. Will make someone a good...
I'm sure some have seen this sight but i just found it. prices seem good. seems a lot of these parts would help in loosing weight and better performance. here's the shorty ...
Got an 87 R10 with a flip kit in the rear. What traction bars will fit? Looking at the Lakewood 21715's but they look like they are for the stock setup with the axle under the ...
So my drivers side fender is in excellent condition. Has the spare cutout that i like. My truck is 66 and has the indentation for the backup lights. Problem is, the passengers...
anyone know of company that sell and re stamp vin.plates and kick panel plates mine are in rough shape been painted over and sand blasted too ,,thx for your time Hop
First, I am new to the 60-66 trucks, I've mainly played around with 73-87s. With that said, I am really digging these trucks now and have been searching for a good driver quali...
Any suggestions? Thinking to run along the passenger side frame to rear tank. Thoughts on vapor return line too? Thanks
Looking for some photos for some ideas. I installed a POL booster and master cylinder setup. Best option from there to the front and rear brakes??
Good evening, Bought my 63 step with a 327 and 3 on the tree this summer. Didn't get to drive it much before the 327 gave out. Just got my 290 hp GM performance 350 c...
Ok...I've been doing lots of reading here about various Quadrajet & timing issues. I have been getting what I would consider lousy mpg(4-5) and driving at highway speed seems to...
Hey guys. I just got an 86 square. I replaced the radiator and flushed the whole cooling system and put in a 190 degree thermostat. What should be the normal running temp. It al...
So I am getting ready to start the engine in my C10 and it ran good before I parked it. Besides the obvious like new fluids and plugs. What else would you recommend I do before ...
After rebuilding the transmission I filled it with the proper weight/rating gear lube. Later noticed that the container was labeled "GL-5 rated". Now i have seen that the GL-5...
Good evening, Bought my 63 step with a 327 and 3 on the tree this summer. Didn't get to drive it much before the 327 gave out. Just got my 290 hp GM performance 350 crate a...
Anyone have any problems with this lift? I did the 4" all spring lift and it sagged a little on the drivers side both front and back, (didnt sag before the lift) I figured the s...
I wanted to confirm whether or not this is a factory rear speaker. It's wired all the way to the factory radio. I have never seen one but heard they did come with one as a rarer...
I have a question and I'm sure I will get a lot of suggestions, I'm just looking for the best solution so I only spend the money once. I have a 68 with a SB350mild cam and TH350...
Hi guys. I just posted a couple of Highway 61 C-10s for sale in the "Misc/Everything Else" section: Black '72 http://67-72chevytrucks.com/vboard/c...ck-1972&cat=18 ...
I searched through a lot of throttle cable bracket threads and have seen a lot of use of aftermarket style brackets. I was wondering if anyone has used a bracket off a GM car? I...
Has anyone swapped a LS3 engine and TR6060 tranny combo into a C10? I've got a 67 C10 that I'd like to try this on. I'm having a forged motor built for my 2010 Camaro and I wa...
Popped out my u-joints using the hammer, wood block, impact socket and drift method (on the concrete floor. New U-joints are the right part number, dimensional - look to be...
I have ran up on this ruck and may have an opportunity to buy it. I have always wanted a Cheyenne and have been watching this one for a while and it has come up for sale. It has...
<< Prev 1   ...   4 5 6 7 8 9 10 Next >>   25 50 75
 

Last videos:

Noise at steering
Noise at steering
Video about Premium Fuel
Video about Premium Fuel
Giants Despair 2017
Giants Despair 2017
Are you getting the ZR1?
Are you getting the ZR1?
Scottsdale Cars & Coffee
Scottsdale Cars & Coffee
now this is cool!
now this is cool!
Loudest C63 ?
Loudest C63 ?
Greenwood Corvette at Daytona
Greenwood Corvette at Daytona

Tags

Cars ·
Travel ·
production-frontend
We use cookies for navigation analysis and personalized advertisement. By using our site, you agree to our use of cookies. Learn more