Forumsee logo
Forumsee » Cars

Messages labeled as 'Chevrolet'

<< Prev 1 2 3 4 5 6 7 Next >>   25 50 75

2 days ago

I have read a handful of the project & builds on this site, & really have enjoyed them. So I though i'd try sharing my truck build, maybe you guys would get a kick out of it. ...
1950 3100. Stock rear springs with a chevy 10 bolt axle. I think I'm over thinking tie plates. I just lowered the front of my truck and I started eye balling the rear axle ...
I don't have my truck in front of me & I'm ordering parts.... Is the center-link/draglink on OBS 88-2000 model trucks a wearable item? They have them listed in the parts choices...
I always liked the quad headlights of the 88-89 vs the euro style headlights on my 97. Typical body parts like hood, grille and fenders all look the same from 88 to 98. Has...
I?ve got a 1990 suburban with drop shackles now. I wasn?t able to use the holes for a 2? drop because the shackles would hit the fuel filler hose. So I cut off the last 2 and us...
Is there a relatively easy way to change the speedometer gearing? Recently changed to a smaller tire size and it is way off. Thanks Paul
Responded to a CL ad for 5 lug rear end today. When I arrived to pick it up I found it was owned by member DWCARDFAN. If you haven't seen his build you should check it out. Pics...
There is a bunch of you guys that have purchased Classic Heartbeat's gas filler grommets. Have you had a chance to install them? If so what do you think about them?
Hi All. Newbie here and thanks for letting me in. I have a 86C20 2wd 350V8. It's a diver and slowly restoring it with my own touch. I love the square body and feel the...
After searching I see suggestions for sway bars but I'd like to stiffen my straight line suspension. I've got a '73 with a 5/7 static drop, twin tube shocks all around, 28" O...
I have a 81' floor shift 4 speed (tranny went) that I'm going to swap a sm326 into from an 82' column shift truck because I have it. I have the column shifter and can use it if ...
Been messing with this thing on and off for a couple of years. 77 Chevy 3/4 ton Camper Special with factory non-resume cruise. Basically it needed everything. I found a NO...
Wondering if someone has some insight on what my cars issue may be. 86 monte with a gen 1 setup.....desmogged 350....turbo 350, no comp......but lately it has started surging th...
Just finished installing my 6.0 with a 4L65 and having an issue with it popping out of drive, while driving down the road. Anyone else experience this and is there a fix?
The guy i bought it from told me today it was originally a 2wd now i am thinking possibly a 71 model the front has 6 lug with the transfer case installed . the rear has the orig...
I was wondering if someone with an unmodified/stock single wall top could measure the holes on top & bedside rails. It seems that the single wall top that came with my blazer p...
I always have a hard time when I go to the dealer and they give me a list of "dealer recommended" work to be done, especially when it doesn't come close to matching up with the ...
Ok guys, Looking for recommendations for new power steering gear for my 68, with everything I've read on rebuilds Im asking who has a good sound power steering gear ?
Its time to figure out what to do with the original transmission in the 1972 C10 long bed, 350ci with a gear ratio 3:73 The truck undergoing some body and front suspension rep...
Hey all, The top half of my driver's side door has gotten loose. I can bend it in and out a couple inches, and when the door shuts it doesn't seal to the weatherstrip at th...
Curious what interior color combos that came in medium red trucks. (514/544 paint codes) 68-72 style. What was stock. Trying to figure out what to go with. Thanks Steve
I currently have 16.5 8 lugs. I like the rally wheels like my dad has on his blazer. Are the Rally wheels available in 8 lug, they can be 15" or 16".
Looking for help/ideas on drivetrain options for 67 K10 that was originally a six stick on column 1/2 ton 4x4.I have a 1970 style LT-1 350 motor and looking for input on what to...
I was wondering if the sport mirrors that fit on 72 c10?s and other years required a backing plate on the inside of door. I?ve been looking in the parts section and seen some w...
I bought a set of blocks from POL...and did some other reading on angle needing to be corrected with shims. What are people using? I did see CCC sells a set of blocks with cor...
<< Prev 1 2 3 4 5 6 7 Next >>   25 50 75
 

Last videos:

Noise at steering
Noise at steering
Video about Premium Fuel
Video about Premium Fuel
Giants Despair 2017
Giants Despair 2017
Are you getting the ZR1?
Are you getting the ZR1?
Scottsdale Cars & Coffee
Scottsdale Cars & Coffee
now this is cool!
now this is cool!
Loudest C63 ?
Loudest C63 ?
Greenwood Corvette at Daytona
Greenwood Corvette at Daytona

Tags

Cars ·
Travel ·
production-frontend
We use cookies for navigation analysis and personalized advertisement. By using our site, you agree to our use of cookies. Learn more